E-35 Epoxy Metal Primer
PRODUCT DESCRIPTION
It is an epoxy-based, solvent-free, two-component metal primer.
SCOPE OF APPLICATION
It is used to prevent rusting and dusting on metal surfaces, to cut moisture and to ensure adherence.
FEATURES
It is a solvent free primer.
It prevents rust and provides a hygienic environment.
It eliminates the adhesion and swelling problems (reaction deterioration) of the adhesive caused by the ground.
It has high bonding and holding strength.
It is resistant to water, humidity and heat after application.
It provides great convenience in cleaning the floor after priming.
It provides a bright and smooth floor appearance.
It is resistant to simple solvents and acids.
Usage Time (23°C, Pot Life) 60 minutes
Drying Time, (25°C) ≤24 hours
Full Drying and Mechanical Strength time 5 days
APPLICATION
The metal to be primed must be clean, free from oil and dirt, especially dry, repaired surface. Component A and component B are mixed homogeneously in the specified amount and applied to the floor with the help of a brush or roller. Under normal conditions, curing is 2-3 hours and drying time is 24 hours. In hot environments, the time is shorter, and in cold environments, this time may be longer. In order to avoid the problem of unreacted resin that may remain on the surface of the container, pour the mixture into a separate clean container after making the mixture and mix it again so that there is no air flow. In applications below 5°C, carbonization problem may occur on the surface.
APPLICATION TOOLS: Roller or brush
