A-305 Polyurethane Paste
PRODUCT DESCRIPTION
It is a polyurethane based, solvent free, two component, thixotropic sealant.
SCOPE OF APPLICATION
Filling rubber gaps in sports ground systems,
Industrial rubber coatings (poliçim, regupol etc.), insulation coatings,
Bonding of natural stone, ceramic, granite, marble and decorative bricks, bonding of PVC floor tile coverings,
In bonding chipboard, chipboard, styrofoam, polystyrene board, acoustic sound insulation,
It is used as a repair and sealing paste.
FEATURES
It is solvent free adhesive.
It has high bonding strength.
It is resistant to water, humidity and heat.
Its non-fluid feature ensures that it remains stable on vertical surfaces.
The product does not decompose, does not open or leave.
No press required.
Can be applied at + 5 / + 40°C.
Pot life (Practice time):
20-30 Minutes
Drying time:
4-6 hours
APPLICATION
The floor to be applied should be clean, dry, free of oil and substances that prevent adhesion to the floor with the help of solvent. The 'Basic Material' of the PU material is first mixed within itself, then all the hardener in the small box is poured into the base material and mixed until a homogeneous mixture is obtained without dragging air. In order to make sure that the mixture is fully made, put the ingredients in another container and mix again until you get a smooth mixture. Mixing should be done with an electric mixer. The mixture should be used within 20-30 minutes. Under normal conditions, curing is 30 minutes, drying time is 4-6 hours. It is recommended to apply the material on both surfaces on surfaces exposed to a small amount of moisture. The time is shortened in hot and intensely humid weather conditions, and this period may be longer in cold environments. The product does not stick to wet and very damp surfaces.
APPLICATION TOOLS: It is applied with a toothed trowel or comb.
The product, which has A and B components mixed, should be used immediately.
